Uwatec Aladin Pro Nitrox Operating Manual page 30

2 Dive Computer
depth dive time
O % MIX
2
max. depth deco info
depth dive time
CNS O LIMIT
2
%
O % MIX
2
DECOSTOP
m
max. depth deco info
depth depth dive time
O % MIX O % MIX
2 2
max. depth max. depth deco info
®
II Aladin Pro Nitrox - The System
Dive-mode:
Activation: automatically at depth of about 0.5 m.
In dive-mode, all diving functions are monitored, i.e. depth and dive time are
displayed, maximum depth is stored, saturation of tissues is calculated, no-stop
time or decompression prognosis is determined, ascent rate is controlled and
displayed and the correctness of the decompression procedure is supervised.
The set percentage of oxygen is displayed at the beginning of a dive until maximum
depth is reached, but at least for the first 5 minutes of the dive.
Wait-mode:
dive time
Activation: automatically on reaching the surface
The wait-mode is activated if the the diver surfaces (diving depth less
than 0.5 m). At the surface, the dive is not completed and entered into
the logbook for an interval of 5 minutes.
This allows the short surfacing for orientation or tank exchange.
deco info
During the 5 minutes waiting time, the set percentage of oxygen is
displayed alternatively with the maximum depth.
II
23