Uwatec Aladin Pro Nitrox Operating Manual page 54

Uwatec aladin pro nitrox dive computer
Table of Contents

Advertisement

4 Functions during the Dive
Decompression values
depth
dive time
CNS O
LIMIT
2
%
O
% MIX
2
DECOSTOP
DECOSTOP
m
max. depth
deco info
Messages:
depth
dive time
CNS O
LIMIT
2
%
O
% MIX
2
DECOSTOP
m
max. depth
deco info
®
III Diving with Aladin
Pro Nitrox
On entering the decompression phase, the arrow
arrow
appears. Right beside the arrow, the deepest decompression
DECOSTOP
stage in metres is displayed. Beside the decompression depth, the decompression
time is displayed in minutes for this stage. The display <3m5:> means that a
decompression stop of 5 minutes at a depth of 3 metres has to be made.
When a decompression stop has been finished, the next higher decompression
stop is displayed. When all decompression stops have been made, the arrow
extinguishes and the arrow
DECOSTOP
time on the lower right shows the no-stop time again.
The decompression alarm is activated if the decompression stop is ignored. The
arrow
begins flashing and an acoustic alarm is initiated. Due to the
DECOSTOP
formation of microbubbles decompression can increase massively if a
decompression stop is ignored. When the surface is reached during the
decompression alarm, the arrow
to the risk of a decompression accident. The SOS-mode is activated 3 minutes
after the dive if corrective action is not taken.
If the total (cumulative) duration of the decompression alarm is longer than a
minute, it is entered in the logbook.
Response: Descend to the prescribed decompression depth immediately!
NO STOP
reappears. The indication of
NO STOP
continues flashing, in order to point
DECOSTOP
disappears. The
III
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents