Table of Contents
Advertisement
POV.HD User Manual
Get Ready
Get Ready
The POV.HD is shipped with everything you need to start making great videos in HD, but a bit of
assembly is required before you get started.
Watch the video tutorials
The POV.HD comes preloaded with video tutorials that demonstrate all the most important
aspects of setting up and using your POV.HD.
a. To view the tutorials on a computer you can upload them from the SD card included with
the POV.HD, or you can access them directly from the V.I.O., Inc. website at
inc.com/tutorials
The tutorials are the only files on the SD card when you receive it. The tutorials
i
follow the standard POV.HD video file name convention which doesn't tell you
which is which, but as you preview the tutorial videos, the LCD on the recorder
will display the name of each tutorial.
b. To view the tutorials on your POV.HD recorder, set up the recorder as shown in the next
step, below, then play the tutorials, as shown in
Set up the POV.HD recorder
1. Install the 4 AA batteries included with the POV.HD in the recorder.
• Turn the recorder over and unlatch the two battery cover clamps.
• Remove the cover and install the batteries.
Because of the seal, the hatch may stick slightly. This is normal. Excessive force is not
required. Check to see that the clamps are unlatched if it feels too tight.
• Replace the cover, and snap the latches back into place.
.
Autogood products «130»
Previewing Video on the
Recorder.
www.vio-
4
Advertisement
Table of Contents
