Attach The Camera Head To The Recorder - V.I.O POV.HD User Manual

POV.HD User Manual
Get Ready

Attach the camera head to the recorder

Please watch the Camera Head Cable Connection tutorial before connecting the camera head to
the recorder.
1. Attach the camera head to the recorder by inserting the camera head's tethered cable into
the connector at the top of the recorder, and securing the connection by turning the
knurled metal ring to screw in the connector. Firm, finger-tight is the correct tightness.
IMPORTANT: When attaching the cable, align the
!
key on the cable connector with the slot on the
recorder connector. When properly aligned, the
cable connector should seat into the recorder connector
until the threads on the cable connector are flush against
the camera connector and turning the knurled metal ring
will thread the connector into the recorder.
If the cable doesn't seat properly, pull the cable back and try again. Use only gentle
pressure for final fitting of the key into the slot.
IMPORTANT: When connecting and tightening the cable, turn the knurled
!
metal ring on the cable connector. NEVER twist the cable itself to tighten it.
Autogood products «130»
6