Table of Contents
Advertisement
POV.HD User Manual
Using the Recorder
Power-off Timeout
Alert Volume
Speaker Volume
Remote Control ID
Video Output
Time and Date
Format SD Card
Update Firmware
Recorder Model
Restore All Default Settings
Sets the idle time required before the recorder shuts down.
Power-off Timeout will not occur while you are recording video
or during video playback. Any use of the soft keys or other
buttons on the recorder resets the Power-off Timeout timer.
Options:
Never
selected values between 15 sec and 30 min
Default:
Never
Sets the volume of alert sounds on the recorder.
Options:
Off
Volume levels 1 - 9
Default:
Level 5
Sets the audio playback volume through the built-in speaker.
Options:
Off
Volume levels 1 - 9
Default:
Level 5
Selects the ID to be used with your wireless remote. The
wireless remote can be set to ID's 0 - 9 to allow multiple POV's
to operate in the same vicinity.
The recorder and remote are both set to ID 0 out of the box.
Default: 0
Note: POV.1, POV.1.5, POV.T, and POV.HD all share the same
wireless remote ID channels, allowing any of these devices to
be used in the same vicinity if different ID's are set on each
device.
Sets the format of analog output through the A/V port on the
recorder.
Options: NTSC or PAL
Default: NTSC
Sets the POV system time and date which is used to designate
file creation time.
Formats the installed SD card.
Caution: This action erases all files on the SD card.
Installs a firmware update from the SD card. This setting is used
as part of the POV.HD firmware update process when updates
are made available by V.I.O.
Displays information about the recorder, firmware, and camera
head on the LCD.
Returns all settings to their default values. This action does not
reset the system time and date.
Autogood products «130»
21
Advertisement
Table of Contents
