What's In The Box - V.I.O POV.HD User Manual

Point-of-view video built for action
Table of Contents

Advertisement

POV.HD User Manual

What's in the Box?

What's In The Box?
The POV.HD you purchased contains everything you need to take high quality HD video. The
POV.HD is built on a modular design that allows you maximum flexibility in how you mount the
HD camera head, which in turn makes it possible for you to optimize the video you capture for
your intended purpose. The POV.HD doesn't dictate how you use it. You decide.
POV.HD Recorder
The camera head attaches to the POV.HD recorder via a 1.5 meter LVDS
cable. The recorder controls recording and playback, supports
advanced image enhancement and exposure controls, and provides a
user interface for adjusting a wide range of system parameters. The
recorder is enclosed in a sealed polycarbonate enclosure that protects
impact and vibration that would prove deadly to other systems. Both
the recorder and the camera head are rated at IP67 for protection
against dust and moisture.
Mounting Systems
One of the most powerful features of the POV.HD is that you can put the camera head where you want it to
be. You can put it on your helmet if that's what you need, but you can also mount it on a snowboard, roll
cage, a bike's front shock, or the windshield frame on a cigarette boat off-shore racer. Vibration, shock, sand,
and water spray aren't going to hurt it. To put the camera head where you want it, you need to be able to
mount it securely. The POV.HD comes with a Mini-mount kit that will meet a wide range of needs. Additional
mount kits and individual mounts are available from V.I.O. for any special need you may have.
Wide Angle HD Camera Head with Tethered LVDS Cable
The camera head imaging system can capture video at 1080p and 720p at
up to 60 frames per second. A six element, all glass lens provides a field of
view up to 142º for 1080p video. Everything is encased in a rugged, heavy
gauge aluminum body and bezel that are sealed against dust and moisture.
The lens is protected against contamination by a sealed glass shield.
Wireless Remote Control
The wireless remote allows you to control recording or still photo capture
without having direct access to the POV.HD recorder. This lets you get set up
for recording, and then stow the recorder out of the way, up to 15 feet from
where you'll be. The remote can be attached on your wrist, in your palm, on
the handlebars or steering wheel, wherever it's easy to use while you're
involved with other things. Like the camera head, the remote is sealed and
rugged and ready for hard use.
Autogood products «130»
2

Advertisement

Table of Contents
loading

Related Products for V.I.O POV.HD

Table of Contents