Recording Still Photos - V.I.O POV.HD User Manual

POV.HD User Manual
Using the Recorder
Loop records a short clip every time you press TAG (or REC/TAG on the remote). The saved
clip, referred to as a loop, includes action immediately before you press TAG, as well as action
immediately following.
Loop & Forward records no video until you press TAG (or REC/TAG on the remote) for the first
time. Then a loop is captured and all action following that first tag is captured as well.
Still Photo captures digital photos as JPEG's.
To set the Recording Method, use the Settings menu.
When you use the Loop or Loop & Forward methods, Loop Record Time determines the length of
the saved video loops. The actual length of a saved loop is never less than the Loop Record Time,
but it can be longer. See
about how the POV.HD determines how much video to save in order to ensure that you capture
the action immediately before and immediately after each tag.
To set the Recording Method, use the Settings menu.
Recording With the Wireless Remote
The POV.HD allows you to control recording and set tags on a video clip without accessing the
recorder. This allows you to stow the recorder in an out-of-the way place while recording. It also
allows you to place the recorder and camera head up to 15 feet from where you are.
The wireless remote operates on any one of 10 frequency channels which allows multiple
POV.HD's and POV.1 series devices to operate in the same vicinity without interfering with each
other.
The wireless remote comes set for channel 0 and the recorder is set to receive channel 0 as well.
Unless you need to operate in the vicinity of other POV systems, there is no reason why this needs
to be changed. If you do need to change the wireless remote communication channel, refer to
Changing the Remote ID

Recording Still Photos

1. In Settings, change the Recording Method to Still Photo.
2. Press the REC button on the recorder. As for any other recording method,
displayed in the upper left, and "Still Photo" will be displayed in the top center of the LCD.
The LCD will show the through-the-camera preview.
3. To capture a still photo, press the REC button. "Still Photo" will appear briefly in place of
"Standby", and the captured still photo will be displayed on the LCD for approximately 1
second.
4. When the recorder is in Still Photo Standby, you can capture still photos using the wireless
remote as well. Every time you press REC on the recorder or REC/TAG on the remote
another still photo is captured.
When you set the Recording Method to Still Photo, it remains in Still
i
Photo until you change it using the Settings menu. If you power down,
the recorder will be in Still Photo Standby when it is powered up. If you
leave Record mode, the recorder will return to Still Photo Standby when
you press the REC button.
Understanding the POV.HD Recording Methods
Channel.
Autogood products «130»
for additinal information
Standby
will be
12