V.I.O POV.HD User Manual page 30

POV.HD User Manual
Tips and Guidelines
You've made a ten minute clip with tags at 2:06, 5:54, and 7:18, and the Loop Record Time is set to
30 seconds. If you run Save Tags, you will get 3 new clips—one for each tag.
Tag Clips Made Using Save Tags
0
Start
Recording
• Clip 1 will run from 2:51 to 2:21. Since the Loop Record Time is 30 seconds, the clip
starts half that length (15 seconds) before the first tag, which is at 2:06, and goes for 30
seconds, which takes it 15 seconds past the tag, which is 2:21.
• Clip 2 will run from 5:39 to 6:09.
• Clip 3 will run from 7:03 to 7:33.
The tag clips created by Save Tags are placed in a subdirectory called "tags". The tag clips can be
uploaded to a computer for viewing or appending into a larger clip, but they cannot be viewed or
manipulated on the recorder itself.
Compile Tags
Compile Tags extracts video clips similar to those made by Save Tags does, and appends those
temporary clips into a single Highlight Clip that is saved in the main clip directory (DCIM). The
individual clips extracted by Compile Tags are not saved. The Highlight Clip is saved in the main
clip directory (DCIM).
1. Compile Tags extracts video segments from the original clip, and...
0
Start
Recording
2. Appends them to form a Highlight Clip
2 min 4 min
tag at
00:02:06
2 min 4 min
tag at
00:02:06
Highlight Clip
Start
End of
Highlight Clip
Autogood products «130»
6 min 8 min
tag at tag at
00:05:54 00:07:18
6 min 8 min
tag at tag at
00:05:54 00:07:18
10 min
Stop
Recording
10 min
Stop
Recording
26