Your Television In A Link Room - Bang & Olufsen BeoVision 7 Manual

Connect link room TV
Follow the procedure described here when
you connect your TV for use in a link room.
Set option for a link room TV
For your entire system to function properly, it
is essential that the TV in the link room is set
to the correct option before you connect it to
the system in the main room. Stand in front
of the link room TV.
Timer programming Program a Play Timer on the TV in the main room, see p. 25.

Your television in a link room

If you have a BeoLink system, operate all connected systems through the TV
in a link room.
1 Connect the link room TV to the mains
supply.
2 Use your remote control to program the
link room TV to the correct option.
3 Disconnect the link room TV from the
mains.
4 Make the necessary connections.
5 Reconnect the link room TV to the
mains supply.
and
Hold Press
and
Hold Press
Option
pgm
Press
LIST LIST
Select OPTION? and
accept
1
*NOTE! If you have a Beo4 and you connect
the TV for use in a link room where other link
systems are already connected, such as
speakers, you must set the TV to Option 5
instead.
17
...
Select zone in which TV
is placed
LIST 6
Select V.OPT Select
1
Option 6*