Play Timer - Bang & Olufsen BeoVision 7 Manual

Timed play and timed standby
Preset your TV to start and stop automatically at
the same time and day every week.*
Switch on the Play Timer
To include the TV in the Play Timer, set the
Timer to 'ON'.
View, edit or delete a Timer
View, edit or delete a Timer from
the list of settings you have entered.
1

*Play Timer

Enter up to six Play Timers. Make sure that the clock is set to the correct
time for the Timers to be executed correctly, see p. 48. The TV cannot be
part of an ordinary Play Timer or Standby Timer until the Wake-up Timer
has been carried out or disabled.
Safety For safety reasons, the stand will not turn or tilt if the TV is switched on by
a Play Timer.
Play Timer
You can make your TV switch on and off automatically by setting a Play Timer
or a Standby Timer in your main room system.
Bring up 'TV SETUP'
menu and select
'PLAY TIMER' menu
1
The source names corresponds to what the
sources are registered as in the 'CONNECTIONS'
Bring up 'TV SETUP'
menu
Bring up 'TV SETUP'
menu
Select 'PLAY TIMER
Select source
PROGRAMMING'
menu
TV
DTV
menu.
DTV2 (V.AUX)
V.AUX2
V.MEM
DVD
DVD2
CD
N.MUSIC
N.RADIO
A.MEM
RADIO
DTV RADIO
STANDBY
Select 'PLAY TIMER' Select 'TIMER ON/
menu OFF' menu
Select 'PLAY TIMER
INDEX' in 'PLAY Select Timer
TIMER' menu
NOTE! Link room systems can perform the
timed play or timed standby functions as well.
However, you must program Timers on your
main room system and activate them on your
link room system.
25
Enter and accept
settings
Select 'ON' and
accept
Edit settings or delete
Timer