The Pincode System - Bang & Olufsen BeoVision 7 Manual

28
Enter the pincode
If you cannot switch on the TV after
disconnection from the mains, wait 30 seconds
and try again.
Change the pincode
Change the pincode you have chosen.*
Delete the pincode
Delete the pincode you have chosen.
Activate the pincode system
Enter a four digit pincode to activate the system.
If you forget the pincode
Contact your Bang & Olufsen retailer to receive
a five digit mastercode.
Useful hints
1
*Change of pincode If you change your pincode more than five times within a three-hour
period, the 'PINCODE' menu becomes inaccessible for three hours,
assuming that the TV is not disconnected from the mains.
Incorrect pincode Five incorrect entries will cause the TV to shut down for three hours,
during which operation is not possible. Leave the TV in standby mode
and wait three hours.

The pincode system

The pincode system prevents people who do not know the pincode from using
the TV. When the pincode system is activated and the TV has been
disconnected from the mains for 15–30 minutes, the system goes into effect.
Enter pincode
Bring up 'TV SETUP'
menu
1
Bring up 'TV SETUP'
menu
Bring up 'TV SETUP'
menu
Hold when prompted
for pincode to display
2
five fields*
Accept
Enter pincode,
STOP
accept and select
Press Press
'NEW PINCODE'
twice
STOP
Enter pincode and
accept
Press Press
twice
STOP
Enter a four digit
code and accept
Press Press
twice
Enter five digit Accept to delete pincode, you can now
mastercode activate pincode system again
NOTE! The first time the TV is switched on you
are prompted for a pincode. Enter the pincode
received from your Bang & Olufsen retailer.
To cancel a pincode entry and clear the input
fields, press BACK. On Beo4, press STOP.
2
*On Beo4 hold
Enter new code,
accept, re-enter code
and accept
Select 'DELETE
PINCODE' and accept
Re-enter the code
and accept
to bring up the five fields.