Set Up Additional Equipment - Bang & Olufsen BeoVision 7 Manual

38
Video signals
Connect your video signals, such as a cable or
antenna to the sockets shown on the diagram.
Loudspeakers
Use Bang & Olufsen Power Link speakers. Use the
cables enclosed with the speakers. Cables are
available from your Bang & Olufsen retailer.
Additional video equipment
Connect many different types of video equip ment
at the same time. Here you can also see examples
of source names you can select for the equipment
in the 'CONNECTIONS' menu.
Useful hints
Equipment with HDMI output

Set up additional equipment

Set up the TV with video sources and loudspeakers.
DVB-T/C
ANALOGUE
HDR
[VMEM]
Digital TV
[DTV]
BeoMaster
MASTER LINK
[PC]
VGA
Camera
AV 6
[CAMERA]
Equipment with HDMI output such as a set-top box can be connected to any available HDMI socket in
the TV, regardless of the particular AV socket group to which you have connected the equipment. To
distribute the source to another room you must also connect the equipment to a 21-pin socket or AV3
video input socket on the connection panel. For more information on how to set up connected
equipment for use, see p. 40.
IR-transmitters: To operate non-Bang & Olufsen
AV 1
products with a Bang & Olufsen remote control,
attach a Bang & Olufsen IR-transmitter to each of
AV 2
the products. Connect each transmitter to the
corresponding socket marked PUC on the main
AV 5
connection panel.
POWER LINK 1
SUB
POWER
LINK
2–6