Bang & Olufsen BeoVision 7 Manual page 39

Register additional equipment
If not detected automatically by the TV, register
the equipment you have connected to the TV.
Repeat the procedure for each socket group.
1
*Equipment name You can move between the lists using or .
'VGA' Equipment connected via VGA socket (AV5 or AV6).
'Y – Pb – Pr' Equipment connected via Y – Pb – Pr socket (AV2 or AV3).
'STANDBY OPTIONS' Set the set-top box to switch off when you switch source or when you
switch off the TV. You can also choose that the set-top box should
always be switched on or that it should be switched on and off
manually by means of the remote control.
Select
'CONNECTIONS' in
Bring up 'TV
'OPTIONS' menu
SETUP' menu
and register
sockets
Contents of the
AV1–AV6
'CONNECTIONS'
DISPLAY 2
menu
HDMI EXPANDER
LINK
Source options in NONE
the 'AV1–AV6'
TV
menus
DTV
DTV2 (V.AUX)
V .MEM
DVD
DVD2
PC
V.AUX2
CENTRE
Select
Select
connected
'STANDBY
equipment
OPTIONS' menu
1
name*
Register connected equipment
Register a connected projector
Enable or disable an HDMI Expander connected to
the HDMI C socket
Set a link frequency and enable the system
modulator
Nothing connected
Equipment, such as a set-top box*
Equipment, such as a set-top box*
Equipment, such as a set-top box
Connected video recorder
Optional Blu-ray player
Connected DVD player or recorder
Connected PC
Equipment, such as a video game console
For connection of a source centre, which may
contain up to six built-in sources (only in the
'AV1–AV2' menus)
The above are only examples of registrations; you
can register additional equipment to any available
source option. You may also have to register
additional equipment in the Master Link system.
2
*Only available if DVB tuner and TV tuner have
been disabled. See p. 29.
37
Follow on-screen
instructions
2
2