Your Television In A Link Room - Bang & Olufsen BeoVision 10 Manual

Connect link room TV
Follow the procedure described here when you
connect your TV for use in a link room.
Set Option for a link room TV
For your entire system to function properly, it is
essential that the TV in the link room is set to the
correct Option before you connect it to the
system in the main room. Stand in front of the link
room TV.

Your television in a link room

If you have a BeoLink system, operate all connected systems through the TV in a
link room.
1 Connect the link room TV to the mains
supply.
2 Use your remote control to program the
link room TV to the correct Option.
3 Disconnect the link room TV from the
mains.
4 Make the necessary connections.
5 Reconnect the link room TV to the mains
supply.
and
Hold Press
and
Hold Press
LIST LIST
Select OPTION?
and accept
Option
pgm
Press
1
*NOTE! If you have a Beo4 and you connect the TV
for use in a link room where other link systems are
already connected, such as speakers, you must set
the TV to Option 5 instead.
23
LIST 6
Select V.OPT Select Option
1
6*
...
Select zone in which TV is placed