Fujitsu PRIMERGY BX400 S1 Options Manual page 43

Figure 28: Opening the cable channel
Ê Remove the cover above the cable channel on top of the system unit by
loosening the two countersunk screws (see circles).
Figure 29: Removing the SATA cable
Ê Detach the plug from the fixing pins (see circles).
Ê Detach the cable from the cable guides (see arrows).
Ê Carefully pull out the other end of the cable of the hole in the system unit.
Ê Store the cable in a safe place. You will need it for the connection of the ODD
on the FSIOM later on.
BX400 S1
Conversion from a rack model to a floorstand model
Options Guide 43