Fujitsu PRIMERGY BX400 S1 Options Manual page 36

ServerView Local Service Display for Blade
Figure 20: Inserting the carrier into the FSIOM
Ê Push the FSIOM into the system unit until the security lock engages.
Ê Connect the SATA cable (see circle).
Ê Disengage the security lock of the FSIOM (1) and push it completely into the
system unit (2). The FSIOM clicks into place in its final position.
Ê Reinstall server blades, storage blades or server blade dummy modules,
see the Operating Manual.
Ê Connect the system unit to the power outlet, and switch it on as described in
the chapter "Completion" on page
36
57.
Options Guide
BX400 S1