Fujitsu PRIMERGY BX400 S1 Options Manual page 29

Figure 11: Connecting the door sensor cable and the LCD cable to the FSIOM
Ê Push the FSIOM into the system unit until the security lock engages.
Ê Connect the door sensor cable (small circle) and the LCD cable (large circle)
to the FSIOM.
Ê Disengage the security lock of the FSIOM (1) and push it completely into the
system unit (2). The FSIOM clicks into place in its final position.
Ê Reinstall server blades, storage blades or server blade dummy modules in
slots 7 and 8, see the Operating Manual.
Ê Connect the system unit to the power outlet, and switch it on as described in
the chapter "Completion" on page
BX400 S1
57.
Options Guide
Optical Disk Drive (ODD)
29