Fujitsu PRIMERGY BX400 S1 Options Manual page 44

Conversion from a rack model to a floorstand model
Removing the front control panel
Figure 30: Removing the front control panel from the FSIOM
Ê Unplug the LCD cable from the front control panel and from the FSIOM (see
circles) and remove the LCD cable by detaching the cable clamp.
Ê Unlock the carrier of the front control panel (1) and remove it from the FSIOM
(2).
I
Carrier, front control panel and LCD cable are no longer required.
I
When a ServerView Local Service Display for Blade is installed in your
system unit, you must remove it in the same way as the front control
panel.
44 Options Guide
BX400 S1