Fujitsu PRIMERGY BX400 S1 Options Manual page 50

Conversion from a rack model to a floorstand model
Securing the top cover module
Figure 37: Engaging hooks of the top cover module
The top cover module is equipped with engaging hooks on both sides (see
circles) for the anchoring on the housing of the system unit.
Figure 38: Oblong holes in the housing of the system unit
In the figure above, the oblong holes in the housing of the system unit for the
application of the engaging hooks of the top cover module are indicated by
circles.
Ê Place the top cover module on the housing of the system unit so that the
engaging hooks interlock with the oblong holes on both sides.
50 Options Guide
BX400 S1