Advanced Chipset Settings - Supermicro X7SLM+ User Manual

Core-Multi-Processing (Available when supported by the CPU)
Set to Enabled to use a processor's Second Core and beyond. (Please refer to Intel's
web site for more information.) The options are Disabled and Enabled.
Clock-Spread Spectrum
Select Enable to use the feature of Clock Spectrum, which will allow the BIOS to
monitor and attempt to reduce the level of Electromagnetic Interference caused by
the components whenever needed. The options are Disabled and Enabled. If this
feature is set to Enabled, the following items will display:
Clock-Spread Spectrum Mode
This feature allows the user to select the Clock-Spread Spectrum Mode to
determine how the BIOS will monitor and reduce the level of Electromagnetic
Interference caused by the components. The options are Down (Down Spread),
and Center (Center Spread).
Clock-Spread Spectrum Control
This feature allows the user to determine the Clock-Spread Spectrum Control
level. The options are 0.5%, 1.0%, 1.5%, 2.0% and 2.5%.
Advanced Chipset Settings
The items included in the Advanced Settings submenu are listed below:
NorthBridge Configuration
This feature allows the user to configure the settings for the Intel 945GC North-
Bridge.
DRAM Frequency
This feature allows the user to select the DRAM Frequency setting. The options
are Auto (Auto-detect), 400 MHz, 533 MHz, and 667 MHz.
Configure DRAM Timing by SPD
Select Enable to allow the BIOS to read the SPD (Serial Presence Detect) chip
which is built in the memory module in order to get the exact memory specifica-
tions. The options are Enabled and Disabled.
Memory Hole
Use the feature to allocate memory resource reserved for use of PCI devices. If
set to 15 MB~16MB, the reserved memory will be placed in the location around
15 MB~16 MB. The options are Disabled and 15 MB~ 16 MB.
4-7
Chapter 4: AMI BIOS