Returning Merchandise For Service - Supermicro X7SLM+ User Manual

X7SLM/X7SLM+ User's Manual
bootable device or USB pen to flash the BIOS. Then, your system will automati-
cally reboot. If you choose the .exe file, please run the .exe file under Windows to
create the BIOS flash floppy disk. Insert the floppy disk into the system you wish
to flash the BIOS. Then, bootup the system to the floppy disk. The BIOS utility will
automatically flash the BIOS without any prompts. Please note that this process
may take a few minutes to complete. Do not be concerned if the screen is paused
for a few minutes.
Warning
to prevent possible system boot failure! Also, the SPI BIOS chip installed
on this motherboard is not removable. To repair or replace a damaged BIOS
chip, please send your motherboard to RMA at Supermicro for service.
Question: What's on the CD that came with my motherboard?
Answer: The supplied compact disc has quite a few drivers and programs that
will greatly enhance your system. We recommend that you review the CD and
install the applications you need. Applications on the CD include chipset drivers
for Windows, security and audio drivers.
Question: How do I connect the ATA100/66 cable to my IDE device(s)?
Answer: The 80-wire/40-pin high-density ATA100/66 IDE cable that came with
your system has two connectors to support two drives. This special cable must be
used to take advantage of the speed the ATA100/66 technology offers. Connect
the blue connector to the onboard IDE header and the other connector(s)
to your hard drive(s). Consult the documentation that came with your disk drive
for details on actual jumper locations and settings.
3-4

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required
before any warranty service will be rendered. You can obtain service by calling
your vendor for a Returned Merchandise Authorization (RMA) number. When
returning to the manufacturer, the RMA number should be prominently displayed
on the outside of the shipping carton, and mailed prepaid or hand-carried. Ship-
ping and handling charges will be applied for all orders that must be mailed when
service is complete.
This warranty only covers normal consumer use and does not cover damages
incurred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor first for any product prob-
lems.
: Do not shut down or reset the system while updating BIOS
3-4