Table of Contents
Advertisement
X7SLM/X7SLM+ User's Manual
Initiate Graphic Adapter
Use the feature to select the graphics controller to be used as the primary boot
device. The options are IGD, PCI/IGD, PCI/PEG, PEG/IGD, and PEG/PCI.
Internal Graphics Device (IGD) Graphics Mode Select
Use the feature to set the amount of system memory to be used by the Internal
Graphics Devices. The options are Disabled, Enabled, 1 MB and Enabled, 8
MB.
PEG Port Configuration
PEG Port
Use the feature to configure the PCI-E Graphics (PEG) Port. The Default
setting is Auto to allow the PEG Port to be automatically detected and
configured by the BIOS. The options are Auto and Disabled.
PEG Force x1
If set to Enabled, PEG will be configured to x1 setting by the BIOS. The
options are Enabled, and Disabled.
Video Function Configuration
DVMT Mode Select
This option allows the user to set the DVMT mode. The options are Fixed Mode,
DVMT Mode and the COMBO mode.
DVMT/Fixed Memory
This option allows the user to set the amount of memory to be used for
operation in the DVMT/Fixed Mode. The options are 64 MB, 128 MB and
Maximum DVMT.
Boot Display Device
This option allows the user to select the boot display device. The options are
CRT on Port 0, LFP on Port2, and CRT-Port 0 & LFP-Port 2.
USB Functions
This feature allows the user to decide the number of onboard USB ports to be en-
abled. The Options are: Disabled, 2 USB ports, 4 USB ports, and 5 USB ports.
USB2.0 Controller
Select Enabled to activate the onboard USB2.0 controller. The options are En-
abled and Disabled.
4-8
Advertisement
Table of Contents
