Installing Smart Software - SMART Board 600 Series Installation And User Manual

To install the USB driver
(Windows only)
22 | CH A P T E R 3 – C O NN E C TI NG Y O U R INT E R AC T I V E W H I T E B O A R D T O Y O U R
COM PU TE R
1. Click Next to direct the wizard to search for an appropriate driver.
2. Click Next again to direct your computer's operating system to search the driver
database on your hard drive for the appropriate driver.
NOTE
If the Windows operating system doesn't find the correct driver, insert the
Windows CD in your CD drive, and then install a USB HID driver. Because
USB HID is a subclass of USB devices, the drivers aren't always included in a
default installation. You must install these drivers on your computer before the
included USB cable will work properly.
3. Click Finish after the driver search or driver installation finishes.
The Ready light turns red and then flashes green, indicating that the controller
is receiving power from the USB connection and is operating in HID mouse mode.

Installing SMART Software

You must install SMART software on the computer connected to your interactive
whiteboard system to access all of its features.
Download SMART software from smarttech.com/software. These pages list the
minimum hardware requirements for each software version. If SMART software is
already installed on your computer, take this opportunity to upgrade your software to
ensure compatibility.