Advantech FPM-3155 Series User Manual page 31

Clocks- Press the !"and"# keys to adjust the number of clocks per line in
the analog to digital converter.
Auto Config- Press the # key to automatically configure the above settings.
OSD-Timeout- Press the !"and"# keys to decrease or increase the
amount of time that elapses before the menu disappears.
OSDH-Position- Press the !"and"# keys to adjust the horizontal position
of the menu.
OSDV-Position- Press the !"and"# keys to adjust the Vertical position of
the menu.
OSDSize- Press the !"and"# keys to decrease or increase the size of the
menu.
Low Zoom Factor Sharpening- Press the !"and"# keys to use adaptive
Contrast Enhancement to adjust the sharpness when scaling textual images.
High Zoom Factor Sharpening- Press the"# key to select a different video
filter that sharpens graphical images when scaling from very low resolutions
or press Press the !"key to select a smoother scaling algorithm.
Moire Cancellation- Press the !"and"# keys to remove patterns due to
non-linearities when scaling from a low resolution to SXGA resolution (or
XGA resolution, depending on panel).
Select Source- Press the !"and"# keys to select the input source you
would like to view. Use 'AUTO' to let the monitor do it automatically.
(AUTO selects in the following priority: Digital RGB, Analog RGB, S-Video,
Composite Video initially. When there is more than one input active, the
source remains the previously active source).
Factory Reset- Press the # key to reset all user settings and then confirm user
settings. The stored in NVRAM will be lost.
Analog Brightness- Press the !"and"# keys to adjust analog RGB offset.
Analog Contrast- Press the !"and"# keys to adjust analog RGB gain.
23 Appendix C OSD Operation