Table of Contents
Advertisement
2
Press Menu and then
"MAINTENANCE" appears on the display, then press Enter.
3
Press Enter when "ADJUST SHADING" appears on the lower
line of the display.
4
You are asked to confirm the selection. Press Enter.
Cleaning the Drum
If you are getting streaks or spots on your print, you may set
the product to clean the drum cartridge.
1
Before setting the cleaning procedure, make sure that
paper is loaded in the product.
2
Press Menu and then
"MAINTENANCE" appears on the display, then press Enter.
3
Press
or
button until "CLEAN DRUM" appears on the
lower line of the display. Press Enter .
4
The product prints out a cleaning page. Toner particles on
the drum surface are fixed to the paper. Repeat printing
three or four times.
Replacing the Drum Cartridge
The useful life of the drum cartridge is approximately 15,000
copies. The LCD displays "DRUM WARNING" when the drum is
near the end of life. Approximately 1,000 more copies can be
made, but you should have a replacement cartridge in stock.
When "DRUM EMPTY" is displayed, the product will stop
operating until the drum cartridge is replaced.
or
repeatedly until
or
repeatedly until
M
AINTENANCE
9
9.7
Advertisement
Table of Contents
