Cleaning The Opc Drum; Adjusting Shading - Samsung SF-555P User Manual

Cleaning the OPC Drum

If you are getting streaks or spots on your print, you may clean the OPC
drum.
1. Make sure that the paper is loaded in the automatic input tray.
2. Press Setup on the control panel.
3. Press ➛¤or ❿ until 'MAINTENANCE' appears, then press Start/Enter.
4. The display shows the first menu, 'CLEAN DRUM', then press
5. Press Stop to return to Standby mode.

Adjusting Shading

The scanning unit becomes dirty, it can alter the shading value. If your
print has black lines or is blurred, adjust the shading setting. Take the
following steps:
1. Load a sheet of white paper into the document feeder.
2. Press Setup on the front panel.
3. Press ➛ or ❿ until 'MAINTENANCE' appears,then press Start/Enter.
4. Press ➛ or ❿ until you find 'ADJUST SHADING', then press
Maintenance
6.2
All manuals and user guides at all-guides.com
The display shows the first setup menu; FAX NUMBER/NAME.
Start/Enter.
The machine automatically pulls in a sheet of paper, and prints it out.
The toner particles on the OPC drum surface are fixed to the paper.
The display shows the first setup menu; FAX NUMBER/NAME.
The display shows the first menu; CLEAN DRUM.
Start/Enter.
The white paper is scanned through the document feeder.