Table of Contents
Advertisement
Fuser Area
If jammed in the fuser area, "PAPER JAM 1" appears in the
display.
N
: The fuser area is hot. Take care when removing paper
OTE
from the product.
1
Press the release lever to open the side cover.
2
Pull down the fuser lever as shown below.
This will release pressure on the paper.
N
: Do not pull paper up through the fusing unit. Unfused
OTE
toner may adhere in the area, resulting in smudged copies.
3
Remove the jammed paper, in the direction shown.
T
10.5
ROUBLESHOOTING
10
Advertisement
Table of Contents
