Kyocera TASKalfa 181 Operation Manual page 38

15 Press the # key.
16
Enter the next block of 3 digits of the address in the
highlighted area.
17 Continue the same procedure for the other 2 blocks.
18 Press the Enter key.
Next, set the subnet mask.
Registering Subnet Mask
To register the subnet mask, continue the procedure from step 18 above.
1 Press the key or the
2
Press the Enter key.
3 Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
4 Press the Enter key.
Next, set the default gateway.
Registering Default Gateway
To register the default gateway, continue the procedure from step 4 above.
1 Press the key or the
2
Press the Enter key.
3
Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
4 Press the Enter key.
5 When you finish making all of the network setting, press the Reset key. The message display
returns to the printer basic screen.
key to select Subnet Mask.
key to select Gateway.
IP Address
10 . 0 .
TCP/IP Setting
DHCP
IP Address
Subnet Mask
Subnet Mask
0 . 0 .
TCP/IP Setting
IP Address
Subnet Mask
Gateway
Gateway
0 . 0 .
Preparations
0 . 0
0 . 0
0 . 0
2-13