Installation Notes
Installation Process Quick Reference
Step
Install the primary processor
Install the secondary processor (optional)
Install memory
Remove the access cover
Install the I/O shield
Rearrange the standoffs
Install the server board
Connect cables to the server board
Finish setting up your chassis
Installation Procedures
Installing the I/O Gasket and Shield
✏
NOTE
An ATX 2.03-compliant I/O shield is provided with the server board. The
shield is required by Electromagnetic Interference (EMI) regulations to
minimize EMI. If the shield does not fit the chassis, obtain a properly sized
shield from the chassis supplier.
The shield fits the rectangular opening in the back of a chassis. The shield has cutouts that match
the I/O ports. Install the shield from inside the chassis.
Server Board installation
Where the information is located
This guide
This guide
This guide
Your chassis manual
This guide
This guide
This guide
This guide and your chassis manual
Your chassis manual
23