Minimum Hardware Requirements; Installation Notes - Intel SE7501BR2 - Server Board Motherboard Product Manual

Minimum Hardware Requirements

To avoid integration difficulties and possible board damage, your system must meet the following
minimum requirements. For a list of qualified memory and chassis components see:
http://support.intel.com/support/motherboards/server/SE7501BR2
Processor
Minimum of one Intel Xeon processor with 512K cache support. For a complete list of supported
processors, see:
http://support.intel.com/support/motherboards/server/SE7501BR2
Memory
Minimum of two 128 MB ECC, DDR266 compliant registered DIMMs on 184-pin gold DIMMs.
Power Supply
Minimum of 450 W. Your supply must provide a minimum of 1.2 A of 5 V standby current or the
board will not boot.

Installation Notes

Installation Process Quick Reference
Step
Remove the access cover
Install the I/O shield
Install the standoffs
Install the rubber bumper
Install the server board
Connect cables to the server board
Install the processor and processor wind tunnel in the Intel® Server
Chassis SC5200 base chassis or in a reference chassis
Install the processor in the Intel® Server Chassis SC5200 with Hot
Swap Redundant Power
Install memory
Server Board Installation and Upgrades
Where the information is located
Your chassis manual
Page 32
Page 34
Page 35
Page 36
Page 37. Refer also to your chassis
manual
Page 40
Page 47
Page 52
31