Change Speed Units - Beurer PM 80 Operating Instructions Manual

As soon as you are in the
HR monitor changes automatically into the main
display. This displays the current speed in the
middle line. The bottom line displays the average
heart rate.

Change speed units

As some people prefer to have the speed display in a particular unit
when training, two different units are offered as an option. Many
runners prefer the information in min/km instead of km/h.
Change into the
MENU
Set Spd'nDist
OPTION/SET
By pressing repeatedly you can
START/STOP
change between the speed units.
OPTION/SET CAL Distance
Spd'nDist
Spd'nDist
is displayed.
In the basic setting [cm]:
(minutes per kilometer) or
(kilometer per hour) is displayed.
In the basic setting [in]:
(minutes per mile) or
per hour) is displayed.
is displayed.
If you would like to calibrate your
Speedbox, continue to read in
section "Calibrate Speedbox".
menu, your
menu.
min/km
km/h
min/mi
(miles
mi/h
35
G
B