Transmit Weight Management Data To The Monitor - Beurer PM 80 Operating Instructions Manual

Fat[g]
OPTION/SET
entire training recording) is dis-
played.
Back to the main display.
OPTION/SET

Transmit weight management data to the monitor

You can transmit your weight data and your body fat from the diag-
nostic scale to the HR monitor. Your HR monitor can store up to 10
recordings of the scale with the current date and time. If you record
more than ten times, then the oldest recordings will be overwritten.
You can transmit one recording per day to the monitor. If a second
recording within one day is transmitted, then the previous recording
of the same day is overwritten. Hold your HR monitor in your hand
during transmission and proceed as follows:
Change into the
MENU
TrData
WMData
OPTION/SET
displayed.
Activate your scale by tapping the
standing surface briefly but with
pressure.
Select the storage place where you
would like to store your personal
data by pressing the "User" button
several times. It is displayed one
after the other until the display "0.0"
(Fat burning during the
Result
is displayed.
(Weight management) is
43
menu.
G
B