Auto-Redial - AT&T 1070 User Manual

NOTES:
• While reviewing the
numbers in the redial
stack, if you want to
place a new call other
than the displayed
number, you need to
press [(AUTO) REDIAL]
to exit the redial list.
• If the prime line is
in used, the phone
automatically selects
another idle line to
dial the call. Once the
auto-redial is active, the
phone always uses the
line you originally used
to dial the call.
• If you want to stay on
the call once the other
person answers, you
must lift the handset,
press [ SPEAKER] or
[HEADSET]. If you take
no action, the line hangs
up and redials again.
Telephone operation
Basic phone operation

Auto-redial

Use this feature to automatically redial a number up to
ten times. When the phone automatically redials the
number, if the prime line is available, the phone uses the
prime line to dial the call.
1. Follow the instructions under Redial stack (page 17)
to find the number you want to call.
2. Press a [LINE] button.
-OR-
Press [ENTER]. Scroll to AUTO REDIAL and then
press [ENTER] again.
3. The telephone activates the speakerphone or headset
(depending on the AUTOMATIC MODE you set, page
39 of the installation guide) and automatically calls the
desired number. The [(AUTO) REDIAL] light will flash.
4. When the other party answers, you will need to take
an action to speak with the other party and stop the
auto-redial attempts. Lift the handset.
-OR-
Press [ SPEAKER].
-OR-
Press [HEADSET] if the headset is connected to speak
with the other party.
While auto-redial is active:
• The telephone activates the speakerphone or headset
(depending on the AUTOMATIC MODE you set, page
39 of the installation guide) and automatically calls the
desired number. The [(AUTO) REDIAL] light will flash.
• After a call is placed, if the line is busy, you will hear
a busy tone for approximately nine seconds before
the set hangs up. Thirty seconds later, the call will
be redialed. The [(AUTO) REDIAL] light remains on
during that 30-second waiting time.
• This process repeats up to 10 times or until the called
number is no longer busy. If the line is still busy after
10 attempts, no more attempts are made.
• If the line is ringing but no party answers after two
attempts, no more attempts are made.
• If you want to turn off the auto-redial feature during
the 30-second waiting time, press [(AUTO) REDIAL].
18