Hardware Setup - Integra DTR-8.8 Instruction Manual

Advanced Setup—Continued

Hardware Setup

This section explains items on the Hardware menu.
On Standby
DVD VCR / DVR
Number
1 2
buttons
Game TV AUX 1
/
4 5
Tape
Tuner
7 8
Phono Net/USB
+10
0
--/--- 10 11
Input Selector
Macro
1 2
Remote Mode
DVD VCR
CDR/MD/Dock
TV Cable
SAT
Dimmer
+
Enter
CH
Enter
Disc
Album
-
Setup
Prev
CH
Display
Rec Playlist
1
Press the [Receiver] Remote
Mode button, followed by the
Receiver
[Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "7. Hardware
Setup," and then press [Enter].
Enter
The Hardware Setup menu appears.
7.Hardware Setup
1.Remote Control
2.Zone2/Zone3
3.Tuner
4.Analog Multich
Enter
5.HDMI
6.Network
3
Use the Up and Down [
buttons to select an item, and
then press [Enter].
Enter
The screen for that item appears.
Remote
indicator
TV
Input
Input
CBL / SAT
+
3
TV CH
AUX 2
-
6
CD
9
TV VOL
D.TUN
Clear
12
3 Zone 3
CD Zone 2
Receiver
Net/USB Receiver
Tape/AMP
Sleep
VOL
Muting
Random
]/[ ]
]/[ ]
4 Use the Up and Down [
buttons to select an item, and
use the Left and Right [
Enter
buttons to change it.
The items are explained below.
5 When you've finished, press the
[Setup] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [Setup], [Enter], and arrow but-
tons.
Remote Control
■ Remote ID
When several Integra/Onkyo components are used in the
same room, their remote ID codes may overlap. To dif-
ferentiate the AV receiver from the other components,
you can change its remote ID from 1, the default, to 2 or
3. This setting changes the AV receiver's remote ID.
Note:
• If you do change the AV receiver's remote ID, be sure
to change the remote controller to the same ID (see
below), otherwise, you won't be able to control it with
the remote controller.
Changing the Remote Controller's ID
1
While holding down the
[Receiver] Remote Mode button,
Receiver
press the TV [Input] button.
The Remote indicator flashes four
times.
TV
Input
2 Use the number buttons to enter
ID 1, 2, or 3.
DVD VCR / DVR CBL / SAT
The Remote indicator flashes twice.
1 2 3
Zone 2 and Zone 3
See "Zone 2 and Zone 3" on page 124.
]/[ ]
]/[ ]
113