Cleaning & Maintenance; Section 6 Cleaning & Maintenance - VarTech Systems VT064C User Manual

Section
Cleaning and Maintenance
Cleaning and Maintenance
6
Cleaning
Occasionally clean the display panel and cabinet with a soft cloth dampened (not
soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the
cloth toward the screen surface to avoid scratching it with accumulated grit.
Do not use paper products as they may scratch the surface. To minimize the risk of
abrasion, allow the screen to stand dry.
Note: The solvent (a 50/50 mixture isopropyl alcohol and water) should be applied
only to the cloth, and not directly on the monitor screen.
Special care should be taken when cleaning a touch screen or polycarbonate shield
that is installed over the screen. Abrasive and certain chemical cleaners can easily
damage the surface.
Never use alcoholic or ammoniac cleaners to clean the polycarbonate shield or a
touch screen.
Replacing a Line Cord
To avoid shock and fire hazards, the monitor's power cord should be replaced if the
insulation becomes broken or if it develops a loose internal connection.
Other Maintenance
Qualified service personnel should perform all maintenance, except for
the power cord replacement described above.
17