Table of Contents
Related Manuals for VarTech Systems VT121 DiamondVue Series
Summary of Contents for VarTech Systems VT121 DiamondVue Series
- Page 1 Solutions for Demanding Applications VarTech Systems Inc. Industrial Flat Panel Displays VT121 DiamondVue/CrystalVue Series 12.1” Flat Panel Series LCD Monitors VT121P-2 · VT121PSS-2 · VT121PHB-2 · VT121PHBSS-2 · VT121C-2 · VT121CHB-2...
-
Page 2: Table Of Contents
User’s Guide Read these instructions completely before attempting to operate your new Color Display. Table Of Contents Page Page Section 1 Section 4 Introduction Touch screen 1.1 About LCD Monitors 4.1 Touch Screen Introduction 1.2 Product Safety Precautions 4.2 Touch Screen Installation Section 2 Section 5 Display Setup... -
Page 3: Introduction
INTRODUCTION SECTION 1 About LCD Monitors A liquid crystal display (LCD) is a thin, flat panel used for electronically displaying information such as text, images, and moving pictures. Among its major features are its lightweight construction, its portability, and its ability to be produced in much larger screen sizes than are practical for the construction of cathode ray tube (CRT) display technology. -
Page 4: Product Safety Precautions
Product Safety Precautions Ensure that sufficient space is available around the display to provide the circulation necessary for cooling. Ensure that the ambient air temperature will not exceed the specified maximum temperature. Do not attempt to service this display yourself. The rear chassis has a seal so that non qualified personnel will not expose themselves to dangerous voltages or other risks. -
Page 5: Included Parts
What is included with your display VT121P-2 LCD Monitor 5 ft Video Cable. A 120VAC power connection. 10-32 Mounting Hardware. (For use with Panel Mount only) 6 ft RS232 Touch Interface Cable (Optional when touch is installed) CD ROM with Touch Screen Drivers (Optional when touch is installed) Users Manual Connecting the Display Connect all cables to the computer first. - Page 6 Note: The following figure is the view looking into the pin end of the male connector or solder terminal end of the female connector. Standard Resolution Supported ⇒ 800 x 600 (VGA) Composite Video Input Connector: CVBS 1.0V p-p S-Video: S-VHS LUMA Signal Input 0.7V p-p CHROMA Signal Input 0.7V p-p Pin assignments for the HD15 video connector.
- Page 7 Signal Connections Cont. Optional BNC Adaptor Cable A 5BNC-to-HD15 adapter cable is available. The functions of the cables are described below. R, B, and G: Red, Green, and Blue input connectors to establish color. These are used for RS-343 analog signals. HS/CS: Separate horizontal/composite sync signal from the video source.
-
Page 8: Getting Started
SECTION 3 Adjusting the display NOTE: By way of explanation the following refers to a set of sample buttons that may be obtained as an option. In addition to power on/off and connection for backlight brightness the controller provides an On Screen Display of certain functions which are controlled by 5 momentary type buttons (analog VR type) or 8 momentary type buttons (digital type): Controls Analog VR type... - Page 9 - - decrease the setting / moves the selector to the previous function (under OSD menu on state) Load factory default Press and hold SEL DN Press and hold SEL DN button to power on the button to power on the controller controller Lock OSD menu (Function with signal input only)
- Page 11 Exit Exit the OSD menu and save the settings Position# Autosetup Auto adjust the positions, phase, frequency Yes No Frequency Adjust the image horizontal size Phase Image Horizontal Fine tune the data sampling position (adjust image quality) Use +/- to move the image Position Image Vertical horizontally Press –...
-
Page 12: Touchscreen
Installation All Vartech Systems displays configured with a touch screen are supplied with a CDROM which includes user manuals, application software, and drivers for various operating systems. Insert the supplied CDROM into a CDROM drive and follow the installation instructions that will appear on the screen. - Page 13 Image position: If it is impossible to position the image correctly, ie the image adjustment controls will not move the image far enough, then test using another graphics card. This situation can occur with a custom graphics card that is not close to standard timings or if something is in the graphics line that may be affecting the signal such as a signal splitter (please note that normally a signal splitter will not have any adverse effect).
- Page 14 Do not use paper products as they may scratch the surface. To minimize the risk of abrasion, allow the screen to stand dry. Special care should be taken when cleaning a touch screen or polycarbonate shield that is installed over the screen. Abrasive and certain chemical cleaners can easily damage the surface.
- Page 15 top/bottom of the cutout in the panel. Extra lock nuts and washers are provided.
- Page 16 SPECIFICATIONS DIAMONDVUE ENGINEERING SPECIFICATIONS Panel Size 12.1” Active Matrix Color Thin Film Transistor (TFT) Type VT121P2, VT121PSS2 Resolution Capabilities SVGA, XGA SVGA 0.3075 (H) x 0.3075 (W) mm Pixel Pitch XGA 0.24 (H) x 0.24 (W) mm Active Display Area 9.69”...
- Page 17 Storage Humidity 10 to 95%NC Operating Altitude Up to 10,000 ft Storage Altitude Up to 40,000 ft 15.0” (w) x 12.5” (h) 381mm x 317.5mm Dimensions 13.7” (w) x 11.25” (h) 347.98mm x 285.75mm Cut Out Dimensions Weight 9.5 lbs (4.31) NEMA 4 12.0 lbs (5.44) NEMA 4X Black Powder Coat Aluminum Bezel Finish Optional: NEMA 4X Stainless Steel...
- Page 18 SPECIFICATIONS CRYSTALVUE ENGINEERING SPECIFICATIONS 12.1” Panel Size Active Matrix Color Thin Film Transistor (TFT) Type VT121PHB2, VT121PSSHB Resolution Capabilities SVGA, XGA SVGA 0.3075 (H) x 0.3075 (W) mm Pixel Pitch XGA 0.24 (H) x 0.24 (W) mm Active Display Area 9.69”...
- Page 19 Storage Altitude Up to 40,000 ft 15.0” (w) x 12.5” (h) 381mm x 317.5mm Dimensions 13.7” (w) x 11.25” (h) 347.98mm x 285.75mm Cut Out Dimensions Weight 9.5 lbs (4.31) NEMA 4 12.0 lbs (5.44) NEMA 4X Black Powder Coat Aluminum Bezel Finish Optional: NEMA 4X Stainless Steel Touchscreen (Optional)
- Page 20 VARTECH SYSTEMS INC. HEADQUARTERS 11529 Sun Belt Ct. Baton Rouge, Louisiana 70809 Toll-Free: 800.223.8050 International Phone: 001.225.298.0300 Fax: 225.297.2440 E-mail: sales@vartechsystems.com www.vartechsystems.com 2.8.2010 VT121P-2 User Guide 486-0033-0...