Initial Setup; First Time Setup - Integra DSR-4.8 Instruction Manual

Initial Setup

This chapter explains the settings you need to make the
very first time the DVD receiver is turned on.
Basically this manual contains procedures using the
remote controller.
Enter

First Time Setup

The very first time you turn on the DVD receiver, the
"Initial Setup" menu appears onscreen.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
✔
4:3 Letter box
4:3 Pan Scan
16:9 Widescreen
16:9 Compressed
Here you need to make a few settings to get the DVD
receiver up and running. You can change these settings
later (see page 57).
1 Use the Up and Down [
buttons to select "TV Shape",
and then press [Enter].
Select "4:3 Letter box" or "4:3 Pan
Scan" if you have a 4:3 TV. Select
"16:9 Widescreen" or "16:9 Com-
pressed" if you have a widescreen TV.
See page 59 for more information.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
The "HDMI Output Setting" menu
appears next.
2 Use the Up and Down [
buttons to select "On" or "Off"
for "HDMI Output Setting", and
then press [Enter].
Select "On" to use the HDMI output.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
The "On-Screen Language" menu
appears next.
3
Use the Up and Down [
buttons to select a language, and
then press [Enter].
See page 61 for more information on
the language options.
TV Shape
HDMI Output Setting
On-Screen Language
The "Initial Setup" menu closes and the
setup is complete.
The DVD receiver is now ready to use.
Note:
You can cancel the "Initial Setup" by pressing the
[Setup] button and complete the settings later by using
the onscreen setup menus (see page 57).
]/[ ]
✔
4:3 Letter box
4:3 Pan Scan
16:9 Widescreen
16:9 Compressed
]/[ ]
: 4:3 Letter box
✔
On
Off
]/[ ]
: 4:3 Letter box
: On
✔ English
Français
Español
Deutsch
Italiano
29