Connecting An Ri Dock; Digital Audio Connection - Integra DSR-4.8 Instruction Manual

Connecting the DVD receiver—Continued

Connecting an RI Dock

■ iPod with video or RI Dock with the OSD mode
Connect your RI Dock's analog audio output jacks
and Video output jack to the DVD receiver's
VIDEO 2/DOCK INPUT L/R jacks and V jack.
Connect the RI Dock with an
DS-A1X/A2/A2X hookup shown below.)
Notes:
• Set the RI Dock's RI MODE switch to HDD or HDD/DOCK.
• Press the Input [ ]/[ ] buttons to select "VIDEO2/DOCK".
• Refer to the RI Dock's instruction manual.

Digital Audio Connection

You can use optical/coaxial digital cable instead of the audio cable when connecting with other AV components.
Connect your AV component's digital audio output jack to corresponding COAXIAL or OPTICAL DIGITAL AUDIO
IN jack of the DVD receiver.
You must assign that jack to an input (see page 56).
Set top box,
VCR, DVD
Recorder
cable. (Onkyo
VIDEO
OPTICAL COAXIAL OUT
Connect one
or the other
■ iPod without video
Connect your RI Dock's analog audio output jacks to
the DVD receiver's VIDEO 2/DOCK INPUT jacks.
Connect the RI Dock with an
DS-A1 hookup shown below.)
Notes:
• Optical digital audio input is assigned for VIDEO 1
INPUT in default.
If you output audio from this input during VIDEO 2/
DOCK INPUT is selected, you must change the
"Video2 Input" setting to "OPT" from "Coax".
• Coaxial digital audio input is assigned for VIDEO 2/
DOCK INPUT in default.
If you output audio from this input during VIDEO 1
INPUT is selected, you must change the "Video1
Input" setting to "Coax" from "OPT".
cable. (Onkyo
25