Controlling Other Components; Controlling A Tv Connected To The Dvd Receiver - Integra DSR-4.8 Instruction Manual

Controlling Other Components

Controlling a TV connected to the
DVD receiver
You can control a TV. You must enter the appropriate
remote control code first.
Number
buttons
TV
Enter
Entering Remote Control Codes
1 Look up the appropriate remote
control code in the "Remote Con-
trol Codes list" at the end of this
manual.
2
Hold down the TV [
[Enter] buttons for about 3 sec-
onds.
HOLD
HOLD
3 Within 30 seconds, use the num-
ber buttons to enter the 4-digit
remote control code.
52
4
Note:
The remote control codes provided are correct at the time
of printing, but are subject to change.
Controlling a TV
To control a TV, point the remote controller at it and use
the buttons explained below. With some TVs, certain
buttons may not work as expected, and some may not
work at all.
] and
TV [
Sets the TV to Standby or On.
TV [Input] button
Selects the TV's AV input.
TV VOL [
Adjusts the TV's volume.
TV [CH +/–] button
Selects channels on the TV.
Point the remote controller at the
TV, and check the operation.
If the remote controller doesn't work as
expected, and several remote codes are
listed, try each one in turn and use the
one that works best.
] button
]/[ ] button