Wep On Wds Links - Cisco Small Business AP541N Administration Manual

4
NOTE
88
If you select None as your preferred WDS encryption option, you will not be asked
to fill in any more fields on the WDS page. All data transferred between the two
access point on the WDS link will be unencrypted.
s
To disable a WDS link, you must remove the value configured in the Remote
Address field.

WEP on WDS Links

Table 21 describes the additional fields that appear when you select WEP as the
encryption type.
Table 21 WEP on WDS Links
Field Description
WEP
Encryption
Select this option if you want to set WEP encryption on the
WEP
WDS link.
If WEP is enabled, specify the length of the WEP key:
Key Length
If WEP is enabled, specify the WEP key type:
Key Type
The number of characters required in the WEP key. The field
Characters
Required updates automatically based on how you set Key Length and
Key Type.
Enter a string of characters. If you selected ASCII, enter any
WEP Key
combination of 0–9, a–z, and A–Z. If you selected HEX, enter
hexadecimal digits (any combination of 0–9 and a–f or A–F).
These are the RC4 encryption keys shared with the stations
using the access point.
Configuring the Wireless Distribution System
64 bits
128 bits
ASCII
Hex
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Wireless