Cisco Small Business AP541N Administration Manual page 31

Dual-band single-radio access point
Hide thumbs Also See for Small Business AP541N:
Table of Contents

Advertisement

2
26
Table 4 Traffic Statistics Description
Field
Network Interfaces
Status
MAC Address
VLAN ID
Name (SSID)
Transmit and Receive Information
Total Packets
Total Bytes
Total Dropped Packets
Total Dropped Bytes
Errors
Description
The name of the Ethernet or VAP interfaces.
Shows whether the interface is up or down.
MAC address for the specified interface. Each VAP
interface has a unique MAC address.
A virtual LAN (VLAN) ID is used to establish multiple
networks on the same access point. The VLAN ID is
configured on the Wireless > VAP tab. (See
Utilization, page
90.)
The network name, also known as the SSID, is an
alphanumeric key that uniquely identifies a VAP. The
name (SSID) is configured on the VAP tab. (See
Bandwidth Utilization, page
the entry is not applicable or is not supported.
Indicates total packets sent (in Transmit table) or
received (in Received table) on that interface.
Indicates total bytes sent (in Transmit table) or
received (in Received table) on that interface.
Indicates total number of packets sent (in Transmit
table) or received (in Received table) on that interface
that were dropped. NA means that the drop and error
counters for the VAP interfaces and the WDS
interfaces are not supported.
Indicates total number of bytes sent (in Transmit table)
or received (in Received table) on that interface that
were dropped. NA means that the drop and error
counters for the VAP interfaces and the WDS
interfaces are not supported.
Displays the total number of transmit and receive
errors detected by the AP. NA means that the drop and
error counters for the VAP interfaces and the WDS
interfaces are not supported.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Status
Traffic Statistics
Bandwidth
90.) NA means either that

Advertisement

Table of Contents
loading

Table of Contents