Cisco Small Business AP541N Administration Manual page 141

7
136
Table 37 Session Management
Field
AP Location
Cluster Name
User MAC
Idle
Rate
Description
Indicates the physical location of the access point.
The location can be a maximum of 64 characters in
length. All alphanumeric characters except double
quote (") are valid. Null or empty space is not allowed.
Enter the name of the cluster for the access point to
join. The name can be a maximum of 64 characters in
length. All alphanumeric characters except double
quote (") are valid. Null or empty space is not allowed.
The cluster name is not sent to other access points in
the cluster. You must configure the same cluster name
on each access point that is a member of the cluster.
The cluster name must be unique for each cluster you
configure on the network.
Indicates the MAC address of the wireless client
device.
A MAC address is a hardware address that uniquely
identifies each node of a network.
Indicates the amount of time this station has
remained inactive.
A station is considered to be idle when it is not
receiving or transmitting data.
The speed at which this access point is transferring
data to the specified client.
The data transmission rate is measured in megabits
per second (Mbps).
This value should fall within the range of the
advertised rate set for the mode in use on the access
point. For example, 6 to 54 Mbps for 802. 1 1a.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Clustering Multiple Access Points
Managing Cluster Sessions