Cisco Small Business AP541N Administration Manual page 107

5
NOTE
102
If you create an excluded view subtree, create a corresponding included entry
with the same view name to allow subtrees outside of the excluded subtree to be
included. For example, to create a view that excludes the subtree 1.3.6.1.4,
create an excluded entry with the OID 1.3.6.1.4. Then, create an included
entry with OID . 1 with the same view name.
Figure 22 SNMPv3 Views
Table 26 describes the fields you can configure on the SNMPv3 Views page.
Table 26 SNMPv3 Views
Field Description
Enter a name to identify the MIB view.
View Name
View names can contain up to 32 alphanumeric characters.
Double quote (") is not a valid character.
Specifies whether to include or exclude the view subtree or
Type
family of subtrees from the MIB view.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Configuring SNMP on the Access Point
SNMP