Step 3 Of 4: Enable Ddns On The Dvr - Lorex LH330 Edge2 Series Instruction Manual

Setting up your DVR for Remote Connectivity
• URL Request: Enter the web site address that will be used to connect to your Lorex product.
For example, if you enter
tomsmith.lorexddns.net
compatible web browser.
9 Click Save to register your product for DDNS. A confirmation email will be sent to the email
address used to register for My Lorex.
You will need this information to enable remote access to your system. Record your
information below:
Domain name/URL Request:
DDNS User Name:
DDNS device password:

Step 3 of 4: Enable DDNS on the DVR

Once you have registered for free DDNS service, use the information in the confirmation
email to configure DDNS settings on your system.
DDNS tab
DDNS setup in Edge Client Software
ATTENTION: You
network
To enable DDNS on your system:
1 Open the Client Software and sign into your DVR.
2 Click the Setup button.
3 Open the DDNS tab.
4 Under DDNS Select, select http://lorexddns.net from the drop-down.
54
tomsmith
, the address to access your video will be
using Client Software or
MUST enter your DDNS information
before attempting remote access.
http://tomsmith.lorexddns.net
over the local
using a
Setup button