The Lorex Live Interface - Lorex LH330 Edge2 Series Instruction Manual

Mobile Apps: Accessing your DVR Using a Mobile Device
• If you are asked if you want to save changes, touch YES to save your DVR's information in the
Address Book or NO to connect without saving your DVR's information.
7 The iPhone connects to your DVR and displays streaming video. Please allow a few seconds
for the connection to establish. To disconnect from your DVR, touch Log Out.

The Lorex Live Interface

The Lorex Live interface allows you to view a single camera in windowed (portrait) or
full-screen (landscape) view, switch between connected cameras, and view video playback.
Touch here to see Camera List
Viewing interface on the iPhone
To switch cameras on the iPhone:
1 Touch the middle button at the bottom of the screen to access the Camera List.
2 Touch the number of the camera you would like to switch to.
1. Some routers may prevent you from connecting to your DVR using a DDNS address on a local
network. If you are unable to connect, try disabling WiFi on your mobile device and attempt to
connect using the 3G or mobile network. If you need to use WiFi, use the DVR's internal IP address
to connect.
82
Click to Log Out of
your DVR
Data transmission
rate (bits per second)
Video refresh rate
(Frames Per Second)
Touch here to
access playback
controls
Touch to switch cameras