Lorex LH330 Edge2 Series Instruction Manual page 111

I have installed the Client Software on my PC or Mac and configured it to connect
to my DVR:
The Client Software is included on the Software CD or as a free download from
www.lorextechnology.com. For installation and configuration instructions, see "Step 3 of 4:
Install the Client Software on your PC or Mac" on page 48 and see "Step 4 of 4: Configure
the Client Software and Confirm Local Connection" on page 48.
I have registered for DDNS:
Go to http://www.lorexddns.net
"Step 2 of 4: Create a DDNS Account" on page 50. Fill in the information below from the
confirmation email you receive after creating your account:
Domain name/URL Request:
DDNS User Name:
DDNS device password:
I have configured my system to connect to the DDNS server and entered my DDNS
information into my DVR List:
For details, see "Step 3 of 4: Enable DDNS on the DVR" on page 54 and see "Step 4 of 4:
Update the Client Software with your DDNS Information" on page 55.
I can access my system from a remote computer:
To access your system remotely:
• Select your DVR's DDNS address from the drop-down menu at the top of the Client Software
window and click
connection is successful.
NOTE: If it does not connect within 30 seconds, click
the connection.
Congratulations! Your DVR is now connected to the Internet. You can now access your DVR
using a compatible web browser or mobile device. For details:
• See "Mobile Apps: Accessing your DVR Using a Mobile Device" on page 80.
• See "DVR Netviewer: Viewing Your DVR Using a Web Browser" on page 71.
and Click Step 1 to create a free Lorex DDNS account. See
to connect. Live video from your cameras will appear when the
Appendix B: Networking Checklist
and click again to refresh
95