4.
Insert the card into the open PCI slot and screw the bracket to the
rear of the case.
NOTE: If the computer takes full profile expansion cards, the low
profile bracket on the card will need to be changed with the included
full profile bracket.
5.
Place the cover back onto the computer.
6.
Insert the power cable into the socket on the power supply and
reconnect your other peripherals.
Driver Installation
Windows
®
2000/XP/Server 2003/Vista
1.
After installing the card in the PC, power up the PC. You will be
presented with the Found New Hardware prompt. Cancel this
prompt.
2.
Place the Driver CD into the CD-ROM drive. Click the Start button
on the taskbar and click Run. Type "D:\SOUND\VT1723\setup.exe".
(Assuming you have placed the CD in CD-ROM drive D:).
3.
Follow any on-screen instructions to complete the software
installation.
4.
Restart your system.
5.
Once you have rebooted the computer, the PCISOUND5LP sound
card will be ready to use.
2
Need help?
Do you have a question about the PCISOUND5LP and is the answer not in the manual?