Connecting To Muti-Room - Sherwood R-807 Operating Instructions Manual

Connecting to Muti-Room

The multi-zone function allows you to play back different input sources in the room where the unit is installed (Main
Room) and in another room (Room2).
main Room
You can enjoy sounds from the equipment connected
to the main unit in a room other than the main room.
For example, you can watch the DVD in the main room
and listen to a CD in the sub room. The main unit can
power up to two independent systems in separate
rooms after you have made the proper multi-room
connections. Different sources can play in two rooms
at the same time or, depending on your needs, the
same source can also be used. The main and sub room
have independent power (the main room power can
be off while sub room is on) and the sub room can be
controlled by the remote control.
Note
• When the Room2 output is enabled, the surround
back speakers in the main room do not produce
sound.
• Remove the unit's power cable from the AC wall
outlet before connecting speakers or an external
amplifier.
Sub Room (Room2)
making Connections
23