Installing The Remote Control Battery; Operating The Range Of The Remote Control - Sherwood R-807 Operating Instructions Manual

R-807 NETWORk AV RECEIVER
Installing the Remote Control
Battery
1
Remove the battery cover.
2
Insert two AAA size batteries with the polarity
matched properly.
Caution
• Always use alkaline batteries, and do not use the
rechargeable batteries (Ni-Cd type).
• If the batteries run out, remove the old batteries
and replace them with new ones within several
minutes.
• If the batteries are removed or have been
exhausted for a longer period of time, memorized
contents will be cleared. In this case, you should
memorize them again.
• If the battery is placed incorrectly, it can cause
explosion.
• Remove the battery if the remote control is not
used for a long period of time.
• Do not leave the product in a hot or humid place.
• Do not handle and store the battery with metallic
tools.
6
Operating the range of the
Remote Control
Use the remote control within a range of about 7 meters
(23 feet) and angles of up to 30 degrees aiming at the
remote control sensor.