Table of Contents
Advertisement
ENGLISH
"INSTALLATION
5. SUBWOOFER
' Output jacks for driving subwoofer.
¢ Connect these jacks to SUBWOOFER
input jacks ofa
separate amplifier or a powered SUBWOOFER.
6. SPEAKERS
Terminals for connecting a pair of speakers, impedance
of 8 Q (L = left, R = right).
F
¢ One of the wires of a speaker cable is marked with a
colour or rib. Connect the marked wire to the red
terminal, the non-marked wire to the black one.
7. DIGI LINK IT SYSTEM CONTROL
(colored green) — remote-control jacks for connection to
the corresponding DIGI LINK II or Il jacks of a Sherwood °
CD (Compact Disc) or tape
player or a remote control receiver. Connect this jack to
the DIGI LINK Il jack of the external equipment that uses
the DIGI LINK If or I remote control system.
These jacks have been added to maintain compatibility
with other Sherwood products.
POWER
8. POWER CORD
Connecting the receiver to the wall socket.
9. OUTLET
Switched output for connecting AC power plugs from
various units such as cassette deck, CD player, etc.
(Maximum capacity is 100 W).
Power supplied through this outlet is turned on and off
by the POWER button of the receiver.
CONNECTING HEADPHONE
* Connect headphone with a 1/4"
plug to the PHONES jacks.
— Inserting the plug will not
disconnect the speakers.
— Turn the speakers off by
pressing the SPEAKER switch
once, press again to turn
speakers on.
Advertisement
Table of Contents
